Advanced Digital Rotational Viscometer Solutions

Essentially, a digital rotational viscometer must be calibrated to give a right reading. Calibration is pretty much the same as adjusting a scale to make sure it shows the right weight. Firstly, you will need a standard liquid whose viscosity you know well. This will help you check if your viscometer is showing the right figures. Run the viscometer and let it warm up if needed. After that, take the standard liquid in a measuring cup. It is a good idea to follow the instructions from ZONWON on the volume of the liquid.

After placing the liquid in the viscometer, put the device into the sample. You might want to pick the right spindle that matches the liquid you are going to test. When everything is set up and ready, take a measurement and note down the reading. Then check this value against the viscosity of the standard liquid. If the two do not match, you will have to change the settings on your auto viscometer. Most digital viscometers nowadays are equipped with features that allow you to do this easily. When you have made the corrections, take a reading again and if it is the same as the standard viscosity. Keep doing it until the readings are matching.

Digital rotational viscometers are found in a variety of applications and operations, and assist people in determining the thickness or thinness of liquids. The largest industry which has the most to gain from such equipment is the food and beverage industry. This industry relies heavily on knowing the viscosity of sauces, juices and similar liquid products. If a company produces ketchup, say, they ought to know that it’s of the proper thickness for consumers or others to appreciate. If it is too loose or too tight, people may not enjoy it. Rotational viscometer Food manufacturers can use a digital rotational viscometer to produce products that are of the proper consistency, which is critical.